China wholesaler 1310 20mm Taperlock Bush for Couplings, Sprockets, and Power Transmission Elements Like V Pulleys bonding bushing

Product Description

Tapered Bushing Taper Lock 1610 1615 for v belt pulley 

Product Description

Unlike typical Bearing Bushes, Taperlock Bushes make use of locking mechanisms that have several useful applications, especially in the case of mechanical applications that involve high speeds. These Bearing Bushes are usually used to secure Pulleys, Sprockets and other elements to shafts. Most Taperlock Bushes are manufactured using strong, yet inexpensive materials like cast iron. However, if you require corrosion resistance, steel and stainless steel equivalents are also available CHINAMFG request. Aside from high-speed applications, Taperlock Bushes are also recommended to be used with Couplings, Sprockets, and Power Transmission elements like V Pulleys. Check out our product range for your all your mechanical and construction needs with products like Adhesives & Lubricants, Ball Bearings, V Belts, and Sprockets,. Visit our products page for Special Offers or contact us with any further enquiries. 

Can’t find what you’re looking for? – Contact us.  

Dimensions

1. Product name: Taper bushing

2. Teeth: Depends on the requirement

3. Material: Cast iron stainless steel,

4 Weight: Depends on the product

5. Type: taper bush 

To Suit Shaft Size: 20mm
Bush Series: 1310
Large End Diameter: 50.8mm
Bush Length: 25.4mm
Keyway Size: 6mm

Bushing Series

1008, 1108, 1210, 1215, 1310, 1610, 1615,

2012, 2017, 2517, 2525,

3571, 3030, 3525, 3535,

4030, 4040, 4535, 4545,

5040, 5050,

6050,

7060,

8065

For Belt Pulley Section SPA, SPB, SPC, SPZ

6. Bore: keyway bore

Taper Bush specification Taper Bush inner bore specification
1008   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25.
1108   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28.
1210 1212 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32.
1310   14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35.
1610 1615 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42.
2012 2017 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50.
2517 2525 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60.
3571 3030 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75.
3525 3535 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90.
4030 4040 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.
4535 4545 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.105. 110.
5040 5050 60. 65. 70. 75. 80. 85. 90. 95. 100 . 105. 110. 115 . 120. 125.

PACKING

Packaging
                      
    Packing  

 

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

OUR COMPANY

ZheJiang Mighty Machinery Co., Ltd. specializes in offering best service and the most competitive price for our customer.

After over 10 years’ hard work, MIGHTY’s business has grown rapidly and become an important partner for oversea clients in the industrial field and become a holding company for 3 manufacturing factories.

MIGHTY’s products have obtained reputation of domestic and oversea customers with taking advantage of technology, management, quality and very competitive price.

 

Your satisfaction is the biggest motivation for our work, choose us to get high quality products and best service.

OUR FACTORY

Main Products:

Timing belt pulleys, timing bars, timing belt clamping plates.

Locking elements and shrink discs: could be alternative for Ringfeder, Sati, Chiaravalli, BEA, KBK, Tollok, etc.

V belt pulleys and taper lock bush.

Sprockets, idler, and plate wheels.

Gears and racks: spur gear, helical gear, bevel gear, worm gear, gear rack.

Shaft couplings: miniature coupling, curved tooth coupling, chain coupling, HRC coupling, normex coupling, FCL coupling, GE coupling, rigid and flexible coupling, jaw coupling, disc coupling, multi-beam coupling, universal joint, torque limiter, shaft collars.

Forging, Casting, Stamping Parts.
Other customized power transmission products and Machining Parts (OEM).

 

 

Application

 

1. Engineering: machine tools, foundry equipments, conveyors, compressors, painting systems, etc.

2. Pharmaceuticals& Food Processing: pulp mill blowers, conveyor in warehouse, agitators, grain, boiler, bakery machine, labeling machine, robots, etc.

3. Agriculture Industries: cultivator, rice winnower tractor, harvester, rice planter, farm equipment, etc.

4. Texitile Mills: looms, spinning, wrappers, high-speed auto looms, processing machine, twister, carding machine, ruler calendar machine, high speed winder, etc.

5. Printing Machinery: newspaper press, rotary machine, screen printer machine, linotype machine offset printer, etc.

6. Paper Industries: chipper roll grinder, cut off saw, edgers, flotation cell and chips saws, etc.

7. Building Construction Machinery: buffers, elevator floor polisher mixing machine, vibrator, hoists, crusher, etc.

8. Office Equipments: typewriter, plotters, camera, money drive, money sorting machine, data storage equipment, etc.

9. Glass and Plastic Industries: conveyor, carton sealers, grinders, creeper paper manufacturing machine, lintec backing, etc.

10. Home Appliances: vacuum cleaner, laundry machine, icecream machine, sewing machine, kitchen equipments, etc.

 

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

 

Contacts

We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit. To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

Any question or inquiry, pls contact us without hesitate, we assure any of your inquiry will get our prompt attention and reply!
 

 

Standard: DIN
Material: Cast Iron
Connection: for Taper Bore
Surface Treatment: Phosphide
Head Type: for Taper Bore
Certification: ISO9001:2015
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

What are the temperature and environmental considerations when using taper bushes?

When using taper bushes in various applications, it is important to consider the temperature and environmental factors that can affect their performance and longevity. Here are some key considerations:

  • Temperature Range: Taper bushes are typically designed to operate within specific temperature ranges. High temperatures can affect the material properties of the taper bush, leading to dimensional changes, reduced strength, or accelerated wear. Similarly, extremely low temperatures can cause brittleness and decreased flexibility. It is crucial to check the manufacturer’s specifications and ensure that the selected taper bush is suitable for the anticipated temperature range in your application.
  • Corrosive Environments: Taper bushes can be exposed to corrosive environments, such as those containing moisture, chemicals, or other corrosive substances. Corrosion can affect the integrity of the taper bush and compromise its performance. In such cases, it is important to select taper bushes with appropriate anti-corrosion properties, such as stainless steel construction, corrosion-resistant coatings, or polymer materials that offer inherent resistance to corrosion.
  • Dust and Contaminants: In applications where taper bushes are exposed to dust, dirt, or other contaminants, it is important to consider their potential impact. Dust and contaminants can accumulate on the taper bush surfaces, leading to increased friction, wear, and potential damage to the mating components. Regular cleaning and maintenance practices should be implemented to ensure the proper functioning of taper bushes in such environments.
  • Lubrication: Lubrication plays a critical role in the performance and longevity of taper bushes. Proper lubrication helps reduce friction, wear, and heat generation between the taper bush and mating components. The choice of lubricant should take into account factors such as temperature, speed, load, and the presence of any specific contaminants or conditions. It is essential to follow the manufacturer’s recommendations regarding lubrication intervals, lubricant type, and application methods.
  • Shock and Vibration: Taper bushes can be subjected to shock and vibration in certain applications. Excessive shock and vibration levels can lead to increased stresses, fatigue, and potential loosening of the taper bush. It is important to select taper bushes that are designed to withstand the expected levels of shock and vibration and ensure proper installation and secure fastening to minimize the risk of failure.

Understanding and addressing the temperature and environmental considerations when using taper bushes is crucial for ensuring their optimal performance, longevity, and reliability. By selecting taper bushes that are suitable for the anticipated operating conditions and implementing appropriate maintenance practices, you can maximize the effectiveness of your power transmission system and minimize the risk of premature failures or performance issues.

taper bush

Can I get advice on selecting taper bushes for specific torque and speed requirements?

Yes, you can seek advice on selecting taper bushes for specific torque and speed requirements. When it comes to choosing taper bushes for a particular application, considering the torque and speed requirements is crucial to ensure the proper functioning and longevity of the power transmission system. Here are some sources where you can obtain advice on selecting taper bushes for specific torque and speed requirements:

  • Manufacturer or Supplier Technical Support: Taper bush manufacturers or suppliers often provide technical support services to assist customers in selecting the appropriate taper bushes for their specific requirements. They have knowledgeable staff who can offer guidance based on the torque and speed parameters of your application. Contacting the manufacturer or supplier directly and discussing your torque and speed requirements will allow them to recommend the most suitable taper bush options for your application.
  • Engineering Consultants or Specialists: Engaging with engineering consultants or specialists who have expertise in mechanical power transmission systems can provide valuable advice on taper bush selection. These professionals can analyze your torque and speed requirements, taking into account factors such as load characteristics, operating conditions, and safety factors. They can then recommend taper bushes that meet the specific demands of your application, ensuring optimal performance and reliability.
  • Online Engineering Communities: There are online communities and forums where engineers, mechanical experts, and industry professionals gather to exchange knowledge and offer advice. Participating in these communities and posting specific questions regarding taper bush selection for torque and speed requirements can lead to valuable insights and recommendations from experienced individuals in the field. These platforms facilitate discussions and allow for collaboration among professionals with diverse backgrounds and expertise.
  • Technical Publications and Resources: Industry publications, technical handbooks, and textbooks related to mechanical engineering and power transmission often cover topics on taper bush selection. These resources provide information on torque and speed considerations and offer guidelines for choosing the appropriate taper bushes. Consulting reputable publications authored by experts in the field can provide detailed advice and insights into the selection process.

When seeking advice on selecting taper bushes for specific torque and speed requirements, it is important to provide accurate and detailed information about your application, including the torque levels, rotational speeds, and any other relevant factors that may impact the performance of the taper bushes. This will enable the experts to make informed recommendations tailored to your specific needs.

By leveraging these sources of advice, you can ensure that you select the most appropriate taper bushes that can effectively handle the torque and speed requirements of your application, promoting efficient power transmission and minimizing the risk of premature failures or other operational issues.

taper bush

What are the advantages of using taper bushes in power transmission systems?

Taper bushes offer several advantages when used in power transmission systems. These advantages contribute to the efficiency, reliability, and ease of maintenance in power transmission applications. Here are some key advantages of using taper bushes:

  • Easy Installation: Taper bushes are designed to simplify the installation process. They have a tapered bore that allows for easy and precise fitting onto the shaft. By using a simple tightening method, such as tightening a set screw or using a locking device, the taper bush securely locks onto the shaft, providing a reliable connection. The ease of installation reduces downtime and labor costs during equipment assembly or maintenance.
  • Secure Shaft Connection: Taper bushes provide a secure and rigid connection between the shaft and the mating component. The taper angle of the bush ensures a tight fit, minimizing any axial movement or slippage between the shaft and the component. This secure connection enhances power transmission efficiency and prevents power loss or misalignment issues, which can lead to equipment damage or decreased performance.
  • Flexibility and Interchangeability: Taper bushes offer flexibility in power transmission systems. They are available in various sizes, allowing for compatibility with different shaft diameters. This interchangeability enables easier component replacement, as taper bushes can be easily swapped out for different sizes without the need for significant modifications. It also simplifies inventory management, as a range of taper bushes can cover multiple shaft size requirements.
  • Reduced Downtime and Maintenance: The design of taper bushes facilitates quick and easy removal and replacement of components during equipment maintenance or repair. With the use of split taper bushes or quick-detachable (QD) taper bushes, the process of disassembling and reassembling power transmission systems becomes faster and more efficient. This reduces downtime, allowing for expedited maintenance procedures and minimizing production or operational disruptions.
  • Cost-Effectiveness: Taper bushes offer a cost-effective solution for power transmission applications. They are generally more affordable compared to alternative methods of shaft connection, such as keyways or splines. Additionally, taper bushes eliminate the need for complex machining processes on the shaft, reducing manufacturing costs and lead times. Their ease of installation and maintenance also contribute to overall cost savings in terms of labor and downtime.
  • Vibration Damping and Misalignment Compensation: Taper bushes provide some level of vibration damping and compensation for minor shaft misalignments. The taper angle and the clamping action of the bush help absorb and distribute vibrations, reducing stress on the shaft and other components. This feature is beneficial in power transmission systems where vibration or misalignment issues can negatively impact equipment performance, reliability, and service life.

Overall, the advantages of using taper bushes in power transmission systems include easy installation, secure shaft connection, flexibility, reduced downtime, cost-effectiveness, and vibration damping capabilities. These advantages make taper bushes a popular choice for connecting rotating shafts to various components, such as pulleys, sprockets, gears, and couplings, in a wide range of industrial applications.

China wholesaler 1310 20mm Taperlock Bush for Couplings, Sprockets, and Power Transmission Elements Like V Pulleys   bonding bushing								China wholesaler 1310 20mm Taperlock Bush for Couplings, Sprockets, and Power Transmission Elements Like V Pulleys   bonding bushing
editor by CX 2023-12-14

Taper Bore Bushing

As one of the leading taper bore bushing manufacturers, suppliers, and exporters of mechanical products, We offer taper bore bushing and many other products.

Please contact us for details.

Manufacturer supplier exporter of taper bore bushing.

Recent Posts